Please fill out the contact form below and we will reply as soon as possible.
Can I use the power button to turn off the system? Yes. Press and hold the power button for about...
November 30th, 2022 472 views 0 likes
This table outlines what the LEDs on the power button indicate: Normal operating modes Stand-by Start-up Operational Shutdown Error modes...
February 5th, 2021 528 views 0 likes
Nureva's touch panel meets the ANSI/NEMA-LD3/2005 standard, which covers the family of products known as high-pressure decorative laminates (HPDL). Nureva...
February 5th, 2021 447 views 0 likes
Nureva supplies a straight 3.5mm jack to RS232 to enable projector-level controls from Nureva Room Manager. The cable is managed...
For the Nureva touch panel's presence detection to work, set your PC's screen power savings settings to: Turn off after:...
February 5th, 2021 393 views 0 likes
The presence detect feature is designed to conserve energy by shutting the WM408i system down when it isn't in use....
February 5th, 2021 527 views 0 likes
No, the WM408i does not come with a stylus. However, the Nureva Wall system is compatible with several off-the-shelf, passive...
February 5th, 2021 492 views 0 likes
The USB cable(s) included with the system are 6' (2 m) long. If you require your USB cables to reach...
February 5th, 2021 529 views 0 likes
We recommend a quality HDMI cable with the following specifications: 4K 60Hz 24 AWG HDR CL3 Having an HDMI cable...
February 5th, 2021 505 views 0 likes
Leveraging the advantage of solid-state illumination we list two numbers: Native contrast ratio 1800:1 This ratio is determined by maintaining...
February 5th, 2021 465 views 0 likes
Nureva Room Manager only recognizes Nureva projectors for the "matching" process. When Cat5e video extenders are used, the projector identification...
February 5th, 2021 435 views 0 likes
You cannot use a different projector with the Nureva Wall and keep the same built-in functionality as the projector included...
February 5th, 2021 432 views 0 likes
The serial number on your WM408i system is located behind the front right cover on your touch panel.
No. DisplayLink USB graphics technology is designed to connect computers to displays, composed of a virtual graphics card (VGC) software...
February 5th, 2021 412 views 0 likes
We recommend using only HDMI cables. While DisplayPort cables can support shorter cable runs, HDMI cables are preferred for longer...
February 5th, 2021 421 views 0 likes
The control module on the Nureva Wall WM408i must be updated manually. To update the control module, follow the steps...
February 5th, 2021 511 views 0 likes
Yes, screen-sharing is available on Nureva Wall. However, touch interactivity will be disabled in this mode. When screen sharing from...
February 5th, 2021 418 views 0 likes