Aligning your projected image

Nureva® Wall WM408i

After you've installed your WM408i system, follow the steps in this video to align your projected image.

Tips:

  • Use the Nureva splash screen when aligning your projected image. This splash screen will appear when there's no video input into the projector and has a white hairline around the projected image frame.
  • For dual or triple displays, adjust all of the projectors at the same time to make sure they align with each other as closely as possible.
  • You may need to repeat the roll, yaw and pitch adjustments after tightening the screws on the projector for fine-tuning.
  • When you're done aligning image, make sure the landed image is focused by following the steps in our article about focusing the projected image.

Was this article helpful?

Updated: November 29th, 2022