Touch is inaccurate

Nureva® Wall WM408i

If the touch on your touch panel is off or inaccurate, follow the steps below.

  1. Recalibate touch using Room Manager's "Touch calibration" feature. If the issue isn't fixed, proceed to the next steps.
  2. Open the computer's display settings in the control panel
  3. Make sure the display resolution is set to 1920 x 1016

  1. Open your computer's graphics card settings. These can usually be located by right-clicking, or pressing and holding, on the desktop and selecting the graphics card from the menu that appears.
  2. Make sure the display resolution is set to "1920 x 1016" and the scaling is set to "Maintain aspect ratio"


If the problem persists, contact Support at support@nialli.com.


Was this article helpful?

Updated: December 1st, 2022