Contact support

Nureva® Room Manager is not showing Nureva Wall

Nureva® Wall WM408i

This issue is usually caused if the Nureva Wall service has crashed.

  1. Open your Windows® task manager
  2. Go to the Services tab

  1. Right-click NurevaWallService and choose Start
  2. Close the task manager
  3. Restart the Nureva Room Manager

Was this article helpful?

Updated: December 1st, 2022

Related Articles

The projected image flickers

If your image is flickering there's a chance your HDMI cable is faulty. Make sure...

My room controller isn't turning my projector on

In order to comply with the industry standby low-power consumption requirements (...

Touch is inaccurate

If the touch on your touch panel is off or inaccurate, follow the steps below. Re...

There is no image on the Nureva® Wall screen

If there is no projected image appearing on your touch panel screen, make sure th...