Contact support

There is no image on the Nureva® Wall screen

Nureva® Wall WM408i

If there is no projected image appearing on your touch panel screen, make sure the HDMI cable is securely connected from your projector to your PC.


Was this article helpful?

Updated: December 1st, 2022

Related Articles

Touch is not working on the Nureva® Wall

If touch isn't working, follow the steps below to troubleshoot: Touch isn't worki...

Replacing the Nureva® Wall touch module

2:17 Keep in mind, this procedure should only be attempted by a trained technicia...

Nureva® Room Manager is not showing Nureva Wall

This issue is usually caused if the Nureva Wall service has crashed. Open your Wi...

One projector is higher than the other

All projectors have some tolerance for "optical vertical offset" where the image ...