Frequently asked questions

Nureva® Wall WM408i

Can I use the power button to turn off the system?

  • Yes. Press and hold the power button for about two seconds to turn off your system.

Can I use dry-erase markers on the touch panel?

  • Yes. The surface of the touch panel is compatible with dry-erase markers.

Can I use the USB ports on the control module for other USB 2.0 devices?

  • No. These ports should not be used for other USB 2.0 devices.

Can I use an HDMI adapter?

  • Yes, so long as the HDMI adapter follows the industry standards when using long-run HDMI cables.

How long is the power cord for the touch panel?

  • The power cord for the NTP-1 touch pane is 3 m long. The power cord for the projector is 4.5 m long.

Can I use a different power adapter for the touch panel?

  • No other replacement power adapters are approved for use with the NTP-1 touch panel. Contact Nureva support to order a new +5VDC power adapter.

Which country power adapters are included with the WM408i?

  • North America, EU, UK and Australia.


Additional information, FAQs, and troubleshooting are available at https://support.nialli.com/interactive-wall.

Was this article helpful?

Updated: December 1st, 2022